Add HardwareRfid class implementation and integrate with main loop

lib/hardware/hardware_led.hpp

@@ -1,5 +1,4 @@
-#ifndef HARDWARE_LED_HPP
-#define HARDWARE_LED_HPP
+#pragma once
 
 #include "hardware.pb.h"
 #include <Adafruit_NeoPixel.h>
@@ -33,5 +32,3 @@ private:
     unsigned long _fadeStartTime;
     bool _isActive;
 };
-
-#endif

lib/hardware/hardware_rfid.cpp

@@ -0,0 +1,44 @@
+#include "hardware_rfid.hpp"
+#include <Arduino.h>
+
+HardwareRfid::HardwareRfid(uint8_t ssPin, uint8_t rstPin)
+    : _mfrc(ssPin, rstPin) {}
+
+void HardwareRfid::begin() {
+    _mfrc.PCD_Init();
+}
+
+void HardwareRfid::end() {
+    // Nothing special to do
+}
+
+void HardwareRfid::update() {
+    if (!_mfrc.PICC_IsNewCardPresent() || !_mfrc.PICC_ReadCardSerial()) {
+        return;
+    }
+
+    // Get the UID
+    uint32_t cardId = 0;
+    for (byte i = 0; i < _mfrc.uid.size; i++) {
+        cardId = (cardId << 8) | _mfrc.uid.uidByte[i];
+    }
+
+    // Create the message
+    hardware_SensorToControlMessage msg = {0};
+    msg.sensor_id = 0; // Assuming single sensor
+    msg.which_payload = hardware_SensorToControlMessage_rfid_reading_tag; // Assuming this is the tag
+    msg.payload.rfid_reading.card_id = cardId;
+
+    // Call the callback if set
+    if (_callback) {
+        _callback(msg);
+    }
+
+    // Halt the card
+    _mfrc.PICC_HaltA();
+    _mfrc.PCD_StopCrypto1();
+}
+
+void HardwareRfid::setCallback(RfidCallback cb) {
+    _callback = cb;
+}

lib/hardware/hardware_rfid.hpp

@@ -0,0 +1,20 @@
+#pragma once
+
+#include <MFRC522.h>
+#include <functional>
+#include "hardware.pb.h"
+
+typedef std::function<void(const hardware_SensorToControlMessage&)> RfidCallback;
+
+class HardwareRfid {
+public:
+    HardwareRfid(uint8_t ssPin, uint8_t rstPin);
+    void begin();
+    void end();
+    void update();
+    void setCallback(RfidCallback cb);
+
+private:
+    MFRC522 _mfrc;
+    RfidCallback _callback;
+};

src/main.cpp

@@ -1,17 +1,28 @@
 #include <Arduino.h>
 #include <hardware_led.hpp>
+#include <hardware_rfid.hpp>
 #include "hardware.pb.h"
 
 // Demo for HardwareLed
 HardwareLed led(2); // Assuming NeoPixel on pin 4 (D2 on ESP8266)
 
+// Demo for HardwareRfid
+HardwareRfid rfid(4, 5); // SS=D2 (GPIO4), RST=D1 (GPIO5)
+
 hardware_LedConfig configs[4];
 unsigned long lastChange = 0;
 int currentConfig = 0;
 
+void onRfidTag(const hardware_SensorToControlMessage& msg) {
+    Serial.print("RFID Tag detected: 0x");
+    Serial.println(msg.payload.rfid_reading.card_id, HEX);
+}
+
 void setup() {
   Serial.begin(9600);
   led.begin();
+  rfid.begin();
+  rfid.setCallback(onRfidTag);
 
   // Static config
   configs[0] = {0};
@@ -53,6 +64,7 @@ void setup() {
 
 void loop() {
   led.update();
+  rfid.update();
 
   if (millis() - lastChange >= 10000) {
     lastChange = millis();