led state applier

src/main.cpp

@@ -1,18 +1,64 @@
 #include <Arduino.h>
+#include <hardware_led.hpp>
+#include "hardware.pb.h"
 
-// put function declarations here:
-int myFunction(int, int);
+// Demo for HardwareLed
+HardwareLed led(2); // Assuming NeoPixel on pin 4 (D2 on ESP8266)
+
+hardware_LedConfig configs[4];
+unsigned long lastChange = 0;
+int currentConfig = 0;
 
 void setup() {
-  // put your setup code here, to run once:
-  int result = myFunction(2, 3);
+  Serial.begin(9600);
+  led.begin();
+
+  // Static config
+  configs[0] = {0};
+  configs[0].brightness = 128;
+  configs[0].duration_ms = 0;
+  configs[0].which_animation_params = 3;
+  configs[0].animation_params.static_params.color = 0x00FF00; // Green
+
+  // Pulse config
+  configs[1] = {0};
+  configs[1].brightness = 128;
+  configs[1].duration_ms = 0;
+  configs[1].which_animation_params = 4;
+  configs[1].animation_params.pulse_params.color = 0xFF0000; // Red
+  configs[1].animation_params.pulse_params.speed_ms = 500;
+
+  // Fade config
+  configs[2] = {0};
+  configs[2].brightness = 128;
+  configs[2].duration_ms = 0;
+  configs[2].which_animation_params = 5;
+  configs[2].animation_params.fade_params.colors_count = 3;
+  configs[2].animation_params.fade_params.colors[0] = 0xFF0000; // Red
+  configs[2].animation_params.fade_params.colors[1] = 0x00FF00; // Green
+  configs[2].animation_params.fade_params.colors[2] = 0x0000FF; // Blue
+  configs[2].animation_params.fade_params.speed_ms = 1000;
+
+  // Flicker config
+  configs[3] = {0};
+  configs[3].brightness = 128;
+  configs[3].duration_ms = 0;
+  configs[3].which_animation_params = 6;
+  configs[3].animation_params.flicker_params.color = 0xFFFFFF; // White
+  configs[3].animation_params.flicker_params.intensity = 50;
+
+  led.set(configs[0]);
+  Serial.println("Starting with static green");
 }
 
 void loop() {
-  // put your main code here, to run repeatedly:
-}
+  led.update();
 
-// put function definitions here:
-int myFunction(int x, int y) {
-  return x + y;
+  if (millis() - lastChange >= 10000) {
+    lastChange = millis();
+    currentConfig = (currentConfig + 1) % 4;
+    led.set(configs[currentConfig]);
+    Serial.print("Switched to config ");
+    Serial.println(currentConfig);
+  }
 }